Bianchi Full carbon forks wrong assembly

Bianchi is issuing an important and urgent safety warning for complete bicycle and frame set models with a carbon steerer tube (full carbon fork).  It has come to our attention that some bicycles, especially but not limited to Sempre Pro and Intenso have not been assembled according to normally expected procedures and this could result in catastrophic failure, leading to serious injury.

If you have stem assembly's with spacers totalling more than 5 mm above the stem please perform the following procedure. Please remove your stem, spacer and compression device and disassemble the fork from the frame. Check the fork for a possible wear mark or horizontal cut in the carbon fiber material in the front, lower position of where the stem is attached to the fork. If you have damage, please contact us to obtain a replacement fork which should be reassembled on your bicycle according to the proper instructions showing the correct assembly method. If you are a Bianchi consumer and are not able or confident to provide this required inspection yourself, please bring your bicycle to a AW Cycles and we will provide this service for you. It is important that you return all damaged forks to Bianchi for our evaluation and control.

More information here

Comodo SSL Certificate